Followers

Sunday, February 16, 2014

Love Candle Holder for Anything But a Card



When one of my teamies came up with the idea of doing a Tic Tac Toe challenge I was all for it! I volunteer on a blog that lists challenges and I have seen quite of few of then & I think its fun to make things guided by a few rules.  Not too many rules, just a few.  Here is the Tic Tac Toe board we used:

**Disclaimer - I had pictures of the whole process for this post but they have magically disappeared! So what you are actually seeing are pictures after the project was done. 

While thinking of what I wanted to create and how I wanted to incorporate the challenge into my project , I was actually leaning toward an “un valentine” theme of some sort – like maybe a wall hanging to celebrate someone’s divorce, but the closer it got to Valentine’s Day the more I wanted to stretch myself and make something happy.  While digging through my stash I spied my glass square candle holder the idea just clicked in place!  I used the middle line, vertical, for this; Recycled the tin can, my faux velvet heart and the black is the ink. 

What I used to make my LOVE candle holder:

First, I washed the candle holder with rubbing alcohol to remove any residue on the glass.  Then I just began adding splotches of alcohol ink (using my blending tool and blending solution.  I love that alcohol ink dries so fast because that lessens a chance of me making the colors muddy.  So I colored my holder and set it aside to dry (overnight – I let lots of things dry overnight).

Then I needed to see if my Silhouette CAMEO would be able to cut the faux velvet ribbon.  I cut a few lengths off the roll (yes, I have a roll of it), went into my designing software & re-sized a heart to the size I wanted, stuck the ribbon on the mat and ran it through.  It took some tweaking with the blade, but finally I got all my hearts cut out.  Since these were to be put on last I put them aside.
This is the Faux Velvet Ribbon
Stamping on metal can be tricky because the metal is so smooth; it’s definitely easier than glass, but you still need to beware of possible slippage.  I took my scrap soda can and carefully stamped LOVE about 5 times using the Jet Black ink.  I let that dry.

I wanted something to look like the metal pieces were attached on to the glass holder, my first thought was to take the folding “legs” off some brads and just glue the tops on.  But the heads of the only black brads I had were too small.  So I made my own.  I took my 3D Enamel Gel and just made rows of little dots on my wax paper.  Some of them came out too thin and looked grey, but the more I tried, the easier it became to make them the size I wanted.  Again, these dried overnight.

Then I cut my metal can where the LOVE was stamped.  I used my paper cutter for this but I don’t think all paper cutters are strong enough to handle the metal.  I have a Genesis Trimmer, I have had this thing for at least 16 years and I haven’t even had to change the blade on it.  Yes, it was costly, but I feel the investment was a good one and it has paid for itself over & over again.  If you are interested in more information about them I highly suggest you go to Bonnie’s Best page HERE .  

Once I had all my metal trimmed around my LOVE sentiment and the gel drops were dry I glued the dots to the metal. To me, they look just like if I had used a real brad!  Gluing the metal onto the glass was the hardest thing for me because I have a love/hate relationship with E6000 glue.  I love the way it really makes things stick to each other but I hate the way it seems to get everywhere!  But I had to use it, so I smeared some on the back of the metal panels and stuck them onto the glass, one on each side.  I wrapped rubber bands around the panels to lessen the chance of them bending up and leaving sharp corners (remember, soda cans spend their life in a can position and I was essentially causing the metal to bend the other way). 
I still have some corners and if I had to worry about anyone getting hurt I would have glossed the whole candle holder, with the metal attached, really thickly – like using a resin – but I don’t have any little hands looking to get cut and if I am careful I should be OK.  The elastics did help bond the metal to the glass so that worked well.  Lastly I attached my faux velvet hearts to each side, under the LOVE.  Done!!

I tried a battery operated tea light and it didn’t give off enough light so for this I think I’ll use a regular votive candle until I can get a battery operated one – can I just say I had NO IDEA that there were SO many battery operated candles!! And some of them even have scent! Ah-Maz-Zing!  
I took a bunch of pictures & it is REALLY hard to get one of something that is lit!
I hope you have enjoyed what the Design Team at Anything But a Card has created using the Tic Tac Toe challenge.  There is still time to enter so go ahead get inspired, then create and ENTER!

Thanks!
Christi


I would like to enter this glass candle holder in the following challenges:
Cut It Up - #38, Valentine's Day
Rhedd's Creative Spirit - Anything Goes 
2 Creative Chicks - Re-Purpose Glass
Challenges 4 Everybody - Anything Goes
Craft My Life (All Crafts Challenge) - Feb/March Anything Goes


13 comments:

  1. Absolutely fabulous, I love it. The metal is so clever and those dots do look like the real thing.

    ReplyDelete
    Replies
    1. Thank you Lisette - I appreciate you taking the time to pop over and take a look :) xo

      Delete
  2. So sweet and great recycling. XOXO Zoe

    ReplyDelete
    Replies
    1. Thanks Zoe - you are such a wonderful friend ~ have a wonderful week :) XOXO

      Delete
  3. What a Bright idea! I love the idea of candlelight for Valentine's day. Very romantic!

    Thanks for linking to our Valentine challenge at Cut it Up!
    Evelyn
    http://mylittlecraftblog.wordpress.com

    ReplyDelete
  4. Absolutely love your project - so original - absolutely fabulous and just a fantastic project you have made – I just love the colors you have used – looks wonderful – it’s great to see something different. Very well done and the best of luck – thank you for joining us at Challenges 4 Everybody. Remember you can enter 3 projects each month. I would love you to join my blog,I have join your blog today. Happy Crafting. Ange xxoo

    ReplyDelete
  5. Totally cute & Fun!!! Great job!
    Thank you for joining us at Cut It Up Challenges.
    Have a wonderful day,
    Migdalia
    *Crafting With Creative M*

    ReplyDelete
  6. What a great project, love how it has turned out.

    Thanks for coming over and joining in with our very first Challenge at Rhedd's Creative Spirit.

    Great Big Huge Hugs

    Becca xxx

    ReplyDelete
  7. Fabulous creation..it turned out beautifully...Thank you for joining us at Craft My Life challenge... Hugs May x x x

    ReplyDelete
  8. Very sweet little creation!
    Thanks for linking up over at 2 Creative Chicks

    Have a creative day.
    Pam
    ♥ Scrap N Sew Granny ♥
    ♥ Pam's Stitched With Love ♥

    ReplyDelete
  9. Lovely work, great colours.

    Thank you for joining us at Rhedd's Creative Spirit.

    Moira DT.

    ReplyDelete
  10. Gorgeous, I love the whole romantic feel to it. I had no idea they made scented battery operated candles either, I'll have to check that out. ~Diane

    ReplyDelete
  11. Awesome project! I love that!! I think the picture is fine and it looks great! Thanks for joining us at Cut it Up!

    Susie

    ReplyDelete

Thank you so much for your comments! I read each and every one :)