Followers

Sunday, June 25, 2017

Sweet Silver Shaker Card

I have loved Shaker Cards ever since I saw the first one - I believe it was in a local stamp store and I ended up going home and searching like crazy for directions on how to make one.  I eventually learned, but getting all the pieces together can be an issue in itself! I was thrilled when I saw Dies R Us carried Shaker Card Kits!  I grabbed the Cheery Lynn Heart Shaker kit as soon as I could. And this is the first card I've made from the kit:
Sorry it is so dark - it's difficult to capture the sparkle!

What I Used to Make my Card:
Cheery Lynn Shaker Card Kit - Heart (you can see ALL the kits here, plus extras)
White Card Base, Square, 5 1/4" x 5 1/4"
Silver Glitter Card
Silver Card
Shaker Fill (I used sequins, punched hearts & small beads)
Lawn Fawn Celebrate Border Die, LF-1429
Sequins - Darice Crystal Cup Sequins 5mm, 10043-8 

I was impressed with the amount of items in the kit.  The contents are all laid out here AND on the same page you will find 2 videos, put out by Cheery Lynn,
explaining these cards. It just could NOT get any easier if they made them for you!  I'm already thinking about which kit I'm going to get next.  Since I like to stretch my supplies,  I'm leaning toward the birthday cake kit. I think it'd be fine as a wedding cake; all you'd have to do is lop off those candles and you could make it any kind of cake you wanted! And they are all calorie free!

I started my card with a square white card base; I knew I wanted to use silver as my other color so when I found a nice piece of silver card I attached that to break up the endless white.  That also helped me figure out where I was going to add my shaker element.

Anyway, I had reservations about the foam cutting through and exactly what sandwich combination to use with my Big Shot (I have old base plates - they rarely show up on instructions anymore, but they work fine, so why spend money on them when I can get more dies?) but I ran the foam through my machine like I normally would; I even used the Tutti metal adapter plate and the foam went through just fine.  I have to say, if you are a serious die cutter you absolutely need one of these plates!  I've seen lots of different ways to ensure your die cut will cut properly and cleanly and I haven't had to ever use anything else once I purchased my metal plate.  It's glorious! OK, back to the card.  I basically followed the directions on the package, which just explained, step by step, how to make the card.

I cut my shaker heart out of silver glitter paper, then cut the acetate (the
acetate in the kit has blue protection paper on both sides that must be removed prior to cutting; I cut a shape out of the acetate that fit the heart, then took off the paper, so I wouldn't be leaving the unused portion of the sheet open to marking.) So I had my foam, my heart shaped front and my acetate.  You decide on your card where you want the shaker portion to be and stick your foam cut out there.  Next was filling the shaker before you seal it up.  The kit comes with 2 shaker filler options called "Shaker Mini's", they are essentially teeny little die cuts that you make using special little embossing pads that come with the kit (or, there are many you can buy separately as well to make your shaker confetti).  You might have noticed I didn't use the product of the Shaker Mini in my card, basically because when I attempted to die cut the little hearts the entire thing broke apart and was useless.  Now, I have emailed the company and explained what I did, I'm sure it was something I did wrong, and I am waiting for them to reply.  My point is, be careful with those Shaker Mini's, they are somewhat fragile! I just punched some teeny hearts out using a hand punch, then added a few small beads and sequins.  

Once my heart was filled, I removed the protector from the sticky foam (both sides of the foam are sticky, by the way) and attached my acetate heart.  I glued on my glitter heart cut out paper on the very top.  I had leftover "inside" foam and glitter paper cut out, so I popped that together and added it to my card.  I die cut the sentiment from white glitter paper, placed it over the silver paper
Another Look
and trimmed the tail so the word would fix properly.  Lastly, I scattered some of the sequins I used in the shaker mix around on the left corner and at the end of the sentiment.


I hope you had as much fun reading this as I had making the card and writing about it.  I try to write my posts as if we are having a cup of coffee (or whatever) and we are face to face.  My tutorials may not be the most technical, but I write them they way I like to read them.  I'd rather feel comfortable when reading a post; that helps me feel as if I accomplish the technique as well! I hope you know you can do that and give Shaker Card kits a try! Don't forget to enter your die cut creations in the Dies R Us Challenge, which runs every two weeks.  Pop by this Inspiration Blog every day to get a new dose of die cut goodness from me or my marvelous teamies! To make things easier, here are all the Dies R Us places to be: 

Don't forget to play along at the Dies R Us Challenge Blog for your chance to win a gift voucher to the Dies R Us Store.  A new challenge begins on the first and fifteenth of every month.  
Be sure to Follow Us on Facebook too. 

I am entering my Sweet Silver Shaker in the following challenges:

Country View Challenges M - Hearts
Scrap from your Heart M - #10, Wedding
Happy Little Stamps - Dies Challenge, Anything Goes
Alphabet Challenge - M - H is for Hearts
Fussy & Fancy Friday - #190, Punches & Dies
Time Out Challenges - #86, Celebrations (I did not use the twist)










13 comments:

  1. I hadn't heard of those kits before. Sounds a great way to make a shaker card. Love the greys you used on your card x

    ReplyDelete
    Replies
    1. Cara - it is SO easy with these kits!! And they are cheap (cheaper than trying to round up all the stuff, for me anyway!) I hope you go take a look and treat yourself :)

      Delete
  2. I love the beauty and simplicity of this! Thanks for joining in with us at Country View Crafts.

    ReplyDelete
  3. This is beautiful! I love the elegant color choice and who doesn't love a shaker card?!

    ReplyDelete
  4. This is really pretty Christi ... You are right though, they can be a bit of a trial to put together, but they are always so worth the end results!
    Thanks for sharing!
    Thanks for sharing!
    (Hugs) Cara
    My Creative Chaos {My Personal Blog}
    TTCRD Challenge Blog {Owner}

    ReplyDelete
  5. A very cool heart card!

    thank you so much for playing along with us at alphabet challenges!

    Hugs and kisses from germany
    silvi, xoxo

    ReplyDelete
  6. A wonderful shaker card, Christi. Love all the glitter.
    Thanks for sharing your card with us at the Fussy and Fancy Friday Challenge.
    Smiles,
    Norma

    ReplyDelete
  7. Your shaker heart is very cute and all the shine from the materials make this card very elegant! Thanks for taking TIME OUT and joining our challenge!

    ReplyDelete
  8. Nice!!!
    Thank you for entered at our challenge at Scrap from your heart
    DT-Heidi

    ReplyDelete
  9. I'm a shaker card fan myself too, they can be so fiddly to make but definitely worth it!! Love your CAS design, really makes the shaker heart the star and the glitter card stock looks fantastic against the simple background. So glad you joined us at TIME OUT!

    ReplyDelete
  10. WOW!!! beautiful shaker heart card..Love those sparkles on heart..Thank you so much for joining us at Happy Little Stampers - Anything goes with Dies Challenge. Hugs xx Deepti

    ReplyDelete
  11. Beautiful and such a clever design.

    Thanks for joining us at the Alphabet Challenge.

    Helen x

    ReplyDelete

Thank you so much for your comments! I read each and every one :)