Let me tell you how the first of the month sneaks up on me - it's pretty stealthy! I'm humming along day after day and then I happen to glance at the calendar and I'm stunned at how much of the month has already flown by. If only I could grab some of that time I wished away as a child; when I couldn't WAIT to grow up! Alas, there is no capturing time, but I can capture a it of childhood back; and I did so for my Altered Eclectics project for this month. I'd love to hear what you think about my Purple Petals Ring! (PS: You can enlarge the pictures by clicking on them)
What I Used to Make my Ring:
Inside "pop ring" from a juice or milk container
Gems - one large and 7 12mm "bubble" gems
Krylon Leafing Pen in Silver
Glue - instant glue
First, let me try to explain what I mean by the inside "pop ring" - the best way I can describe it is to show you a picture.
You'll find this inside ring is there once you open the containers outer twist off cap - I have found them in quart cartons of both milk and juice. When I opened my vanilla almond milk and popped it off, I immediately put it on my pinkie (the only finger of mine that it fits) and admired it - it needed to be made!
While the white of the ring may be fine for your project, I knew I needed to color it and the Krylon Leafing Pens are perfect. I have been using these pens for years, from everything to outlining a card or making the old fashioned polished stone with alcohol inks and they last a long time and are well worth the money, in my opinion. Also, if you look closely at the picture of the ring, you can see that there were some edges that we sort of ragged with a bit of thin plastic - I colored my ring and then sanded the ragged bits off, and then touched the ring up. Not that you can see them but for my own piece of mind. You will also notice the outer edge of the bubble (that is face down) isn't even all the away around - never fear, we have ways to work around this.
Once the ring was colored, I had to figure out a way to hold it so I could put on the petals. Since there is a bump on the top side of the ring, the petals are needed to ensure the large gem doesn't wobble. Low and behold I had a pill saver type thingie that I had gotten as a freebie from some company, but you can find them cheap at drugstores or your local Dollar Store. I ripped the top off of one of the individual pill compartments and put waxed paper on the sides in case my glue dripped - turns out I didn't need the waxed paper at all - but I didn't know that at the time.
This part took the longest because it turns out my instant glue wasn't so instant, so off to the side for the night it went. If you look closely at the picture, you can see the numbers on the dome, another reason I felt the petals would help "hold" the bigger, middle gem. When I picked the ring up, I noticed that a few of the petals were still wobbly (I suspect due to the part of the ring where the lip was smaller than the other parts) but I went ahead and glued the middle gem on and set it aside again.
Once it was dry, I flipped the ring over and put a generous amount of glue all around the petals to help stabilize them and it worked like a charm! The glue isn't really that visible, in the picture the light is reflecting (I wanted you to be able to see it), but when you look at the ring in regular light it doesn't look anywhere near that bad.
So there you have it! You could save these inside ring pop closures and make a bunch of rings, for you to either wear on your pinky, or to give some lucky child. These would be perfect for that friend who loves funky, chunky jewelry also. And as I was making this I thought of so many other options to use for toppings; sequins, buttons, little beads, basically anything you want! I hope this little post has inspired you to use something out of the box for your next creation! Please consider popping over to the Altered Eclectics blog and seeing what my wonderfully talented teamies have made to also inspire you ~ Fondly, Christi
I am entering my Purple Petals ring in the following challenges:
Crafty Creations - #286, Anything Goes
Creative Moments - #65, Anything But a Card
Everybody Art Challenge - #318, Anything Goes
TTCRD - Always Anything Goes (end wk of 4/26)
Recycle, Re-Purpose & Re Invent - (m) April Challenge
 |
| Say hello to my Purple Petals Ring! |
What I Used to Make my Ring:
Inside "pop ring" from a juice or milk container
Gems - one large and 7 12mm "bubble" gems
Krylon Leafing Pen in Silver
Glue - instant glue
 | |||
| Where you will find the ring |
 |
| The "ring" on it's top |
While the white of the ring may be fine for your project, I knew I needed to color it and the Krylon Leafing Pens are perfect. I have been using these pens for years, from everything to outlining a card or making the old fashioned polished stone with alcohol inks and they last a long time and are well worth the money, in my opinion. Also, if you look closely at the picture of the ring, you can see that there were some edges that we sort of ragged with a bit of thin plastic - I colored my ring and then sanded the ragged bits off, and then touched the ring up. Not that you can see them but for my own piece of mind. You will also notice the outer edge of the bubble (that is face down) isn't even all the away around - never fear, we have ways to work around this.
Once the ring was colored, I had to figure out a way to hold it so I could put on the petals. Since there is a bump on the top side of the ring, the petals are needed to ensure the large gem doesn't wobble. Low and behold I had a pill saver type thingie that I had gotten as a freebie from some company, but you can find them cheap at drugstores or your local Dollar Store. I ripped the top off of one of the individual pill compartments and put waxed paper on the sides in case my glue dripped - turns out I didn't need the waxed paper at all - but I didn't know that at the time.
I carefully used a small amount of instant glue and placed the petals around the lip of the bubble. 
This part took the longest because it turns out my instant glue wasn't so instant, so off to the side for the night it went. If you look closely at the picture, you can see the numbers on the dome, another reason I felt the petals would help "hold" the bigger, middle gem. When I picked the ring up, I noticed that a few of the petals were still wobbly (I suspect due to the part of the ring where the lip was smaller than the other parts) but I went ahead and glued the middle gem on and set it aside again.
Once it was dry, I flipped the ring over and put a generous amount of glue all around the petals to help stabilize them and it worked like a charm! The glue isn't really that visible, in the picture the light is reflecting (I wanted you to be able to see it), but when you look at the ring in regular light it doesn't look anywhere near that bad. So there you have it! You could save these inside ring pop closures and make a bunch of rings, for you to either wear on your pinky, or to give some lucky child. These would be perfect for that friend who loves funky, chunky jewelry also. And as I was making this I thought of so many other options to use for toppings; sequins, buttons, little beads, basically anything you want! I hope this little post has inspired you to use something out of the box for your next creation! Please consider popping over to the Altered Eclectics blog and seeing what my wonderfully talented teamies have made to also inspire you ~ Fondly, Christi
 |
| Here's Manny holding up the ring - he's been feeling left out! |
Crafty Creations - #286, Anything Goes
Creative Moments - #65, Anything But a Card
Everybody Art Challenge - #318, Anything Goes
TTCRD - Always Anything Goes (end wk of 4/26)
Recycle, Re-Purpose & Re Invent - (m) April Challenge
